67mm diameter pressure gauge. Bottom entry. G 1/2 inch (304 Stainless Steel) process entry thread.

The GY is an economical, easy-to-use, battery-powered intelligent pressure gauge which has a clear, 4-digit LCD display. The gauges are suitable for use in gas or liquid applications which do not corrode stainless steel. Commonly used in water, petroleum, chemical and machine applications.

The unit of measurement is user selectable via the front facia (MPa, psi, bar, kPa, kg/cm²) and the pressure type, gauge or absolute, is also shown, where applicable. The display also features a battery status indicator, pressure percentage bar and peak pressure display, so that at a glance the user can see what the process pressure is in relation to the maximum and minimum levels.

The maximum/peak pressure is recorded during operation; this is easily recalled via the front fascia. To save battery life the gauge can be programmed to turn off automatically after 1 to 15 minutes. This can extend the battery life to 2 years.

Note: the pressure gauge must be installed vertically if its measuring range is less than 1 bar.