Band/Nozzle Heaters

Product Code: LBN

These stainless steel heaters are designed to clamp around barrels, metal pipes or tubular chambers to inject heat from the outside.

The heaters are Mica insulated, 80/20 nickel/chrome elements, clamped and protected by a formed steel plate. The element resistors are carefully spaced to provide even heat.

The split ring design allows the heater to be slipped over the barrel/tube and fastened into place by roll bolt clamps.

The standard design incorporates fibreglass insulated connection cable.

The bands can be designed to incorporate cut-outs, various lengths, diameters and termination options.

  • Features
  • Technical
  • Options
  • Documents
  • Software
    • Designed to clamp around barrels, metal pipes and tubular chambers
    • Coated mild/stainless steel band body, Mica insulated elements
    • Supplied as standard with fibreglass insulated cable
    • Custom designs available
  • Technical Details
    Heater Band Body Coated Mild/Stainless Steel
    Element  80/20 Nickel Chrome 
    Element Insulation 3 x Phlogopite Mica wound plates
    Cable Glass fibre insulated x 610 (24") long
    Supply Voltage 240V AC Nominal (other voltages available)
    Max. Operation Temperature Approximately +250°C
    Wattage Nominal Wattage varies with voltage. W2=W1 (E2/E1)²
    (W1 = rated wattage, W2 = actual wattage, E1 = rated voltage, E2 = supply voltage)
    Manufacturing Tolerances Inside Diameter: ±0.635mm, Width: ±0.635mm, Resistance: ±7%
    Watts Density (W/cm²) 120W = 6.1, 225W = 4.5, 175W = 3.9, 280W = 4.5, 300W = 3.8
  • To Suit Pipe OD (mm) Width (mm) Wattage (W) Voltage (V) Watts Density (W/cm²) Order Code
    25 25 120 240 6.1 LBN25-25-120-240
    35 45 225 240 4.5 LBN35-45-225-240
    38 38 175 240 3.9 LBN38-38-175-240
    40 50 280 240 4.5 LBN40-50-280-240
    50 50 300 240 3.8 LBN50-50-300-240
  • No software available

Note: other diameters, widths and wattages are available. Please contact sales for further information.