Measure and store up to 32,510 temperature readings from either a K, J or T type thermocouple (attached at the base of the unit).
The HDT-350 data logger is supplied with a basic Type K thermocouple for 0°C to +200°C (+32°F to +392°F) measurement and a long-life replaceable lithium battery which can typically allow logging for 6 months (depending on logging rate, ambient temperature and use of alarm LEDs). Status is indicated by flashing red and green LEDs.
Easily configure the data logger by plugging it into a PC's USB port and running the free EasyLog USB software, available for download using the link below. Configuration options include: logger name, measurement unit (°C or °F), logging rate, high/low alarm levels, start date/time and logging mode. Logged data can be downloaded via the software and then graphed, printed or exported to other applications.
Supplied Thermocouple Specification: Thermocouple Type K, 100mm x 3.0mm Ø stainless steel probe, 1350mm fibreglass insulated cable with miniature thermocouple plug attached.
Lascar Product Code: EL-USB-TC
Accepts K, J, T thermocouple inputs
Supplied with basic Type K thermocouple (0°C to +200°C / +32°F to +392°F)
Easy setup using free EasyLog USB PC software
Programmable alarm thresholds
Status indication via red and green LEDs
Replaceable battery supplied
Link to free configuration software supplied
Detachable wall clip cap
Probe Measurement Range
-200°C to +1350°C (-328°F to +2462°F)
-200°C to +1190°C (-328°F to +2174°F)
-200°C to +390°C (-328°F to +734°F)
Accuracy (overall error)
±1°C (±2°F) data logger only - thermocouple error not included
The core of Lascar's USB data logging solution is the free software supplied with each USB data logger. Using a wizard format to guide the user through setup of the data logger and subsequent download of collected data, the software puts the 'easy' into EasyLog.
Compatible with 32-bit and 64-bit versions of Microsoft Windows 7, 8 and 10
Note: supplied product colour may vary from image shown