C Series Fuzzy + PID Temperature/Process Controller (72 x 72 x 59mm)

Product Code: C72

Send Enquiry

Panel Mount: 72mm (W) x 72mm (H) x 59mm (D), 2 event inputs, profile option with 16 segments, configurable as 1x16, 2x8, 4x4, ramp and soak.

The new generation, low cost, PID microprocessor-based with Fuzzy logic controller series incorporate two bright, easy to read LCD displays which indicate Process value (PV) and Set Point value (SV).

The Fuzzy Logic technology incorporated on this series of controllers enables a process to reach the predetermined set point in the shortest time with minimum of overshoot during Start up (Power ON) or external load disturbances.

A wide range of inputs including Thermocouple (13 types), RTD, Milliamps (mA) and Voltage (V) are supported.

Configuration software available to download. Other accessories also available.

CONTACT SALES FOR FURTHER INFORMATION.

  • Features
  • Technical
  • Options
  • Documents
  • Software
    • Panel mount: 48mm (W) x 96mm (H) x 59mm (D)
    • 2 event inputs
    • 16 configurable segments
    • High quality LCD display
    • High accuracy 18 bit A-D input, 15 bit D-A output
    • Fast 200msec sampling rate
    • Universal inputs: Thermocouple, RTD, mA, V
    • Fuzzy + PID Control
    • Auto-tuning
    • RS-485 and analog retransmission
    • CT inputs for heater break detection
    • Remote set point option
    • Bumpless transfer
    • Lockout protection
    • Bi-directional menu navigation
    • Configuration software available to download. Other accessories also available
  • Technical Details
    Power Supply 90 to 250 VAC, 47-63Hz; 11 to 40 VDC / 20 to 28 VAC, 47-63 Hz
    Signal Inputs Thermocouple: K, J, T, N, E, R, S, B, L, U, P, C, D
    RTD: Pt100 (DIN), Pt100 (JIS)
    Current: mA (-3mA…27mA), Voltage: V (-1.3V…11.5V)
    Remote Set Point Input Type: Linear Current (-3mA…27mA), Linear Voltage (-1.3V…11.5V)
    Accuracy: ± 0.05%
    Event Inputs 2
    Output 1 & Output 2 Type Relay, Pulsed Voltage, Linear Voltage & Linear Current
    Relay Rating 2 A, 240 V AC, 200,000 Life Cycles for Resistive Load
    Pulsed Voltage Source Voltage 5 V, Current Limiting Resistance 66 Ω
    Isolation Breakdown Voltage 1,000 V AC
    Load Capacity of Linear Output Linear Current: 500 Ω max, Linear Voltage: 10 K Ω min
    Alarm Relay Type Form A, max rating 2 A, 240 V AC, 200,000 Life Cycles for Resistive Load
    Alarm Functions Dwell Timer (0.1…4,553.6 minutes), High & Low (Deviation, Deviation Band, Process)
    Alarm Mode Latching, Hold, Normal, Latching / Hold
    Data Communication Interface / Protocol RS-485 / Modbus RTU (Slave Mode)
    Analogue Retransmission Output Signal 4-20mA, 0-20mA, 0-10V (accuracy ±0.05% of span ±0.0025%/˚C)
    Isolation Breakdown 1,000 VAC minimum
    User Interface Upper Display Digit Size (mm) 15.0
    Lower Display Digit Size (mm) 8.3
    Programming Port Interface/PC Communication Micro USB / Automatic Setup, Calibration and Firmware upgrade. Configuration software available (see accessories)
    Control Mode Output 1 Reverse (Heating) or Direct (Cooling) action
    Output 2 PID cooling control, Cooling P band, Dead band
    Control Options On / Off or PID (Fuzzy logic modified proportional band), Manual (Heat MV1 and Cool MV2)
    Auto-Tuning Cold Start and Warm Start
    Profiler Availability Option
    No. of Segments 4 / 8 / 16
    Environmental & Physical Operating / Storage Temperature Operating: -10°C…+50°C, Storage: -40°C…+60°C
    Humidity 0…90 % RH (Non-Condensing)
    Altitude / Pollution 2,000 Metres Maximum, Pollution level Degree II
    Insulation Resistance 20 MΩ Minimum (@ 500 V DC)
    Dielectric Strength 2,000 V AC, 50/60Hz for 1 Minute
    Vibration / Shock Resistance 10…55Hz, 10 m/s² for 2 hours / 200 m/s² (20g)
    Moulding Flame Retardant Polycarbonate
    Mounting Panel
    Dimensions & Weight Physical (W x H x D) (mm) 72 x 72 x 59
    Depth Behind Panel (mm) 50
    Cut Out Dimensions (mm) 68 x 68
    Weight (grams) 190
    Approval Standards Safety UL61010C-1, CSA C22.2 No. 24-93, EN61010-1 (IEC1010-1)
    Protective Class IP66 for Panel, IP20 for terminals and housing. All indoor use.
    EMC (CE) EN 61326-1: 2013
    CISPR 11: 2009 +A1: 2010 [Group 1, Class A]
    EN 61000-3-2: 2014 Class A
    EN 61000-3-3: 2013
  • Model Code
    C72 C72

     

    Power Input Code
    90...250 VAC, 47-63 Hz 4
    11...40 VDC / 20...28 VAC, 47-63 Hz 5

     

    Output 1 Code
    Form A Relay 1
    SSRD, 5V / 30mA 2
    Isolated 4-20mA / 0-20mA 3
    Isolated 0-10V 5
    SSRD, 14V / 40mA C

     

    Output 2 / Alarm 1 Code
    None 0
    Form A Relay 1
    SSRD, 5V / 30mA 2
    Isolated 4-20mA / 0-20mA 3
    Isolated 0-10V 5
    SSRD, 14V / 40mA C

     

    Alarm 2 to 3 Code
    None 0
    Form A Relay on Alarm 2 1
    Form A Relay on Alarm 2 to 3 2

     

    Event Inputs Code
    None 0
    2 Event Inputs 1

     

    Option 1 Code
    None 0
    RS-485 & Remote Set Point 1

     

    Option 2 Code
    None 0
    1 CT Input & Remote Set Point 1
    2 CT Inputs & Remote Set Point 2

     

    Option 3 Code
    None 0
    Retransmit 4-20mA / 0-20mA & Remote Set Point 1
    Retransmit 0-10V & Remote Set Point 2

     

    Option 4 Code
    None 0
    Terminal Cover 1
    Ramp & Soak Profiler 2
    Terminal Cover and Ramp & Soak Profiler 3

     

    Order Code (example): C72 4 1 1 1 1 1 2 1 2

  • PDF (tab 4)Datasheet
  • Configuration Software for C Series Controllers

    Configuration Software for C Series Controllers

    v1.0
    Accessory for C Series controllers C22, C42, C62, C72, C82, C83, R22
    Compatible with 32-bit and 64-bit versions of Microsoft Windows XP, 7, 10
    FTDI CDM Drivers for Windows

    FTDI CDM Drivers for Windows

    v2.12.28.2