Wika Electronic Pressure Switch
Product Code: PSD-30
Award-winning functionality and design
The design and outstanding functionality of the PSD-30 received the IF Product Design Award in 2009. The display, with its .35" ( 9 mm) high digits, was designed to be as large as possible and positioned at an angle, so the pressure reading is visible from a distance of at least 10 feet (3 meters). Time-proven and rugged LED technology with 14-segment display is used so alphanumeric messages are much easier to under-stand compared to typical 7-segment displays.
The large, ergonomically designed programming push buttons provide the user with tactile feedback for immediate confirmation that the touch event was registered by the trans-mitter. The user-friendly menu navigation layout meets the new VDMA Standard form for fluid sensors (24574-1, Part 1, pressure switch). The goal of the VDMA is to simplify the use of pressure switches by standardizing menu navigation and display parameters.
Flexible and adaptable
The PSD-30 can be adjusted three different ways to fit specific installation requirements. The display and electrical connection can be rotated independently to maximize visibility while still orienting the electrical connection in the best position for the cable connector. If the transmitter is installed overhead or upside down the display can be electronically rotated 180°.
Quality and reliability
Time tested, proven WIKA thin film and piezoresitive pressure sensor technology is an integral part of the PSD-30 providing the high quality and long term reliability users demand.
- Features
- Technical
- Documents
- Software
-
Applications
- Pumps and Compressors
- Hydraulics and pneumatics
- Machine Tools
- Machine building
Special Features
- Available with single or dual NPN or PNP solid state switches
- High visibility, rugged 14-segment red LED display electronically rotates 180° for top-down installation
- Independent rotation between the M12x1 electrical connection and the display
- User-friendly, intuitive 3-key operation
- Versions with 4-20 mA or 0-10V analog output available
- Programming menu meets VDMA Standards for user friendly navigation
-
Technical Details Pressure Ranges 1..600 bar relative 0..25 bar absolute -1..24 bar vacuum Accuracy <= 1% Switching Output 1 or 2 (PNP or NPN) Analogue Outputs (optional) 4~20mA 0..10 V Process Connections G 1/2, G 1/4 according to DIN 3852-E 1/4 NPT R 1/4 PT 1/4 Electrical Connections M12 x 1, 4 or 5 pin Display 14 segment, LED red 4-digits, 9mm height -
No documents available
-
No software available