Buy Online
 Din Rail-Mounting 4~20mA Thermocouple Transmitter'); "(TXD) Din Rail-Mounting 4~20mA Thermocouple Transmitter")
24V DC Power Supply.
The TXD range of Din Rail-Mounting linearised transmitters have a very similar specification to the TXH head mounted transmitters. They can be supplied pre-ranged or can be easily programmed on site by PC using a USB port driven confguration kit. Simply connect two clips to the transmitter and follow he software instructions - specialist calibration equipment is not required! Incorporates the latest digital technology to ensure accurate drift free performance. The units have an isolated output for increased protection.
- Input Types: Thermocouple Types K, J, N, E, T, R & S.
- Temperature Range: Supplied pre-ranged as ordered or Programmable (confguration kit required).
-
Accuracy:
- Types K, J, E, N: ±0.1% of FS ±0.5°C (plus sensor error)
- Type T: ±0.2% of FS ±0.5°C (plus sensor error)
- Types R, S: ±0.1% of FS ±0.5°C over the range 800 to 1600°C (plus sensor error)
- Isolation: Tested to 250 V dc
- Sensor Burnout: Either Upscale or Downscale (as specifed)
- Measurement Accuracy: 0.15°C ±0.05% of reading.
- Maximum Lead Resistance: 20 Ohms per leg
Output
- Output Type: 2 wire 4~20mA current loop
- Maximum Output: 21.5mA (in high burnout condition)
- Minimum Output: 3.8mA (in low burnout condition)
General
- Update Time: 500ms
- Response Time: 1 second
- Start Up Time: 4 seconds (output < 4mA during start up)
- Warm Up Time: 1 minute to full accuracy
- Power Supply: 11 to 30 Volts dc
- Isolation: 500 V dc
Environmental
- Ambient Operating Temperature: -20 to 70°C
- Ambient Humidity Range: 10 to 90% RH non condensing
- Dimensions: 90mm H x 17.5mm W x 56.4mm D
Also available: Low Cost USB Port Driven Configuration Kit (TX-KIT). Contact sales for further information.
 |  |  |
 (TX-KIT) PC USB Configuration Kit |  (TXH) Head-Mounting 4~20mA Thermocouple Transmitter |  (CP) Single Pair Heat Resistant (HR) PVC Flat Twin (105°C) |
