Audible and Visual Alarm for WiFi Data Logging Sensors

Product Code: HDT-WiFi-Alert

Standalone monitoring system for all HDT-WiFi sensors. The HDT-Wifi-Alert will receive alarm messages from any HDT-WiFi sensor connected to the same wireless network and indicates an alarm activation using bright LEDs with a choice of nine alarm tones.

The HDT-WiFi-Alert has been designed to be continuously powered via the mains (optional accessory) but also contains a rechargeable lithium polymer battery for device positioning and limited power during the event of a mains failure.

The WiFi signal strength indicator is activated by pressing the HDT-WiFi-Alert button three times. All LEDs and a fast beep indicate a strong signal. Limited LEDs and slow beep indicate a weak signal.

The audible alarm can be muted by pressing the HDT-WiFi-Alert button once or remotely using the PC software. There is also a configurable auto-mute function.

Setup is completed using the free EasyLog WiFi software, available for download using the link below.

The unit can be attached to a wall or flat surface using the bracket provided, and has a protection rating of IP44 (with cable connected).

This device is IEEE 802.11b compliant, supports WEP, WPA/WPA2 and enterprise networks.

Supplied with wall mounting bracket and USB cable (type A to type B).

Lascar Product Code: EL-WiFi-Alert

  • Features
  • Technical
  • Documents
  • Software
    • Detects alarms from any HDT-WiFi sensor device on the same wireless network
    • Audible alarm with built-in speaker (SPL 100dBA at 1m)
    • Visual alarm from high brightness LEDs
    • Continues to work when the PC is turned off
    • Easy setup using free EasyLog WiFi PC software
    • Supplied with wall mounting bracket and USB cable (type A to type B)
    • USB mains power adaptor also available
  • Technical Details
    USB Supply Voltage 4.5V D.C. (min), 5V D.C. (typical), 5.5V D.C. (max)
    Sound Output 100 dBA at 1m
    Operating Temperature Range  -20°C to +60°C (-4°F to +140°F)
    Dimensions  82mm x 70mm x 36mm
  • Free EasyLog WiFi software

    Free EasyLog WiFi software

    Easy to install and use, the EasyLog WiFi software allows connection of sensors to a WiFi network. The user can select where data is stored during the setup process (computer or cloud). Cloud accounts can be created during setup and are powered by FilesThruTheAir™.

    Compatible with 32-bit and 64-bit versions of Microsoft Windows 7, 8 and 10

Note: supplied product colour may vary from image shown